Need help?Do you have a question about the Vu+ Solo 2 and is the answer not in the manual?
General| Processor | Broadcom BCM7356 |
|---|---|
| CPU | Dual Core 1.3 GHz |
| RAM | 1 GB DDR3 |
| Operating System | Linux |
| HDMI | Yes |
| USB | 2 x USB 2.0 |
| Ethernet | 10/100 Mbps |
| S/PDIF | Yes |
| Common Interface Slots | 1 |
| Video Decoding | MPEG-2 / H.264 |
| Video Resolution | up to 1080p |
| SCART | Yes |
| Dimensions | 280 x 200 x 50 mm |
| Tuners | DVB-S2 |
| Connectivity | Ethernet, USB |
| Smart Card Reader | Yes |
| Internal HDD | Optional 2.5" SATA |
| Audio Decoding | MPEG-1 Layer I/II, MP3 |
| Flash Memory | 256MB NAND |
Shows device status and information on the front panel display.
Slots for conditional access modules and smartcards.
Port for connecting USB memory sticks or HDDs.
Connectors for satellite signal cables.
Ports for connecting to TVs and audio systems.
Ports for network, power, and cooling components.
Identifies buttons for device power and AV source selection.
Explains buttons for adjusting volume, muting, and changing channels.
Covers buttons for accessing menus, information, and keypad operations.
Guides on connecting satellite cables to the tuner inputs.
Instructions for connecting the device to a television via HDMI.
Details the process of powering on the device using the adapter.
Guides the user through selecting the preferred language for the interface.
Covers the initial setup for satellite signal configuration and tuner settings.
Explains how to perform an automatic or manual scan for TV channels.
Guides on installing pre-defined lists of satellite services.
Details the setup process for parental control features and PIN configuration.
Provides methods to access detailed information and the on-screen manual.
To Next Page
