Do you have a question about the Vu+ UNO and is the answer not in the manual?
Signal source | Satellite |
---|---|
Supported video modes | 1080i, 576p, 720p |
Digital signal format system | DVB-S2 |
Personal Video Recorder (PVR) included | - |
Audio formats supported | AC3, MP3 |
Image formats supported | JPG |
Video formats supported | MPEG1, MPEG2, MPEG4 |
Display type | VFD |
Display digits | 12 digits |
Built-in display | Yes |
Processor frequency | 400 MHz |
Built-in HDD | No |
Ethernet LAN data rates | 10, 100 Mbit/s |
USB 2.0 ports quantity | 2 |
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity | 0 |
Product color | Black |
Audio decoders | Dolby Digital |
Frequency range | 950 - 2150 MHz |
Number of tuners | 1 tuner(s) |
Audio output channels | - channels |
Operating system installed | Linux |
Digital Satellite Equipment Control (DiSEqC) | 1.0, 1.1, 1.2 |
AC input voltage | 100-240 V |
AC input frequency | 50 - 60 Hz |
Power consumption (standby) | 0.5 W |
Power consumption (typical) | 15 W |
Dimensions (WxDxH) | 340 x 272 x 60 mm |
Depth | 272 mm |
---|---|
Width | 340 mm |
Height | 60 mm |
Weight | 2350 g |
General safety warnings and precautions for using the Vu+ device.
Step-by-step guide on connecting the satellite cable to the Vu+ receiver.
Guide on connecting the power cord and initial power on procedures.
Steps to select the primary language for the user interface.
Guides the user through the initial setup wizard for satellite connection.
Configuring tuners and performing channel scans.
Tips and solutions for common problems encountered with the device.