Need help?Do you have a question about the VWR Standard Series and is the answer not in the manual?
General| Manufacturer | VWR |
|---|---|
| Control | Microprocessor |
| Display | Digital |
| Shelves | 2 adjustable shelves |
| Series | Standard |
| Material | Powder-coated steel exterior |
| Application | General incubation |
| Compatibility | Standard labware |
| Sterility | Not applicable |
Detailed specifications for the Model 1000 orbital shaker, including dimensions, electrical requirements, fuses, speed, and orbit.
Detailed specifications for the Model 3500 orbital shaker, including dimensions, electrical requirements, fuses, speed, and orbit.
Detailed specifications for the Model 3750 orbital shaker, including dimensions, electrical requirements, fuses, speed, and orbit.
Detailed specifications for the Model 5000 orbital shaker, including dimensions, electrical requirements, fuses, speed, and orbit.
Detailed specifications for the Model 10000 orbital shaker, including dimensions, electrical requirements, fuses, speed, and orbit.
Detailed specifications for the Model 15000 orbital shaker, including dimensions, electrical requirements, fuses, speed, and orbit.
Instructions for operating the Model 1000 Standard Orbital Shaker, covering setup, speed setting, and shutdown procedures.
Instructions for operating the Model 3500 and 5000 Standard Orbital Shakers, covering setup, speed, and timed operation.
Description of the standby button and indicator light for controlling power and mode on the Advanced Orbital Shaker.
Explanation of the speed display and associated up/down arrows and on/off buttons for speed control.
Explanation of the time display and associated up/down arrows and on/off buttons for timer function.
Steps to prepare the Advanced Orbital Shaker for use, including plugging in and activating from standby.
Procedure for setting and adjusting the speed of the Advanced Orbital Shaker, including ramping feature.
Instructions for setting the timer to zero or continuous mode, and how to stop the timer function.
Procedure for setting a programmed time for the Advanced Orbital Shaker, including starting, stopping, and repeating cycles.
Details load sensing for Models 3500+, overload protection for 3750+, and disabling features.
Instructions for managing beeper settings and performing unit calibration procedures.
Information on RS-232 serial port use for data logging and control, including technical support contact.
Resolving problems related to the unit not running, noise, or incorrect speed settings.
Guidance for specific error codes (E3, E4, E7, E8) and their causes and solutions.
To Next Page