To Next PageTo Next PageWhat to do if my VWR Laboratory Equipment shows error E4?
If your VWR Laboratory Equipment displays error E4, it indicates an issue with the load. Make sure the load is evenly distributed and does not exceed the unit's maximum load capacity.
What to do if my VWR 3500 Advanced Laboratory Equipment shows error E3?
If your VWR Laboratory Equipment displays error E3, first remove any mechanical obstructions. If the problem continues, it may be due to a drive system failure, ceased bearing or broken drive belt.
Why my VWR 3500 Advanced is excessively noisy?
Excessive noise from your VWR Laboratory Equipment could be due to a misaligned sensor fan or motor. Check that the tray is tightly secured.
How to fix VWR Laboratory Equipment that will not run?
If your VWR Laboratory Equipment won't run, it might be due to a mechanical or motor obstruction. Add or replace the fuse as necessary.
What to do if my VWR 3500 Advanced shows error E7?
If your VWR Laboratory Equipment shows error E7, try reducing the speed setting or the weight on the unit.
General| Brand | VWR |
|---|---|
| Model | 3500 Advanced |
| Category | Laboratory Equipment |
| Language | English |
Details the product warranty terms and conditions.
Instructions for setting up the shaker.
General warnings and precautions for safe operation.
Technical details for Model 3500.
Technical details for Model 3750.
How to use the advanced model.
Common problems and solutions.
