What to do if my VWR 5000 Standard shows error E4?
If your VWR Laboratory Equipment displays error E4, it indicates an issue with the load. Make sure the load is evenly distributed and does not exceed the unit's maximum load capacity.
What to do if my VWR 5000 Standard Laboratory Equipment shows error E3?
If your VWR Laboratory Equipment displays error E3, first remove any mechanical obstructions. If the problem continues, it may be due to a drive system failure, ceased bearing or broken drive belt.
Why my VWR Laboratory Equipment is excessively noisy?
Excessive noise from your VWR Laboratory Equipment could be due to a misaligned sensor fan or motor. Check that the tray is tightly secured.
How to fix VWR 5000 Standard that will not run?
If your VWR Laboratory Equipment won't run, it might be due to a mechanical or motor obstruction. Add or replace the fuse as necessary.
What to do if my VWR 5000 Standard shows error E7?
If your VWR Laboratory Equipment shows error E7, try reducing the speed setting or the weight on the unit.
Advice for optimal performance, stability, and safety features.
Instructions on how to silence or restore audible beeper operation.
Steps for self-calibrating the advanced orbital shaker.
Information regarding the serial port for data logging and control.
General| Capacity | 5000 g |
|---|---|
| Readability | 0.1 g |
| Calibration | External |
| Units | g, kg, oz, lb |
| Timer | Yes |
To Next Page