To Next PageTo Next PageWhat to do if my VWR 3500 Standard Laboratory Equipment shows error E4?
If your VWR Laboratory Equipment displays error E4, it indicates an issue with the load. Make sure the load is evenly distributed and does not exceed the unit's maximum load capacity.
What to do if my VWR Laboratory Equipment shows error E3?
If your VWR Laboratory Equipment displays error E3, first remove any mechanical obstructions. If the problem continues, it may be due to a drive system failure, ceased bearing or broken drive belt.
Why my VWR 3500 Standard Laboratory Equipment is excessively noisy?
Excessive noise from your VWR Laboratory Equipment could be due to a misaligned sensor fan or motor. Check that the tray is tightly secured.
How to fix VWR 3500 Standard Laboratory Equipment that will not run?
If your VWR Laboratory Equipment won't run, it might be due to a mechanical or motor obstruction. Add or replace the fuse as necessary.
What to do if my VWR 3500 Standard Laboratory Equipment shows error E7?
If your VWR Laboratory Equipment shows error E7, try reducing the speed setting or the weight on the unit.
General| Brand | VWR |
|---|---|
| Model | 3500 Standard |
| Category | Laboratory Equipment |
| Language | English |
Lists catalog numbers for various orbital shaker models by plug type.
Details the product warranty period, coverage, and limitations.
Lists all items included in the product package.
Steps for unpacking, placement, and initial connection of the shaker.
Guidelines for periodic checks, cleaning, and user maintenance.
Specifies the intended laboratory applications for the shakers.
Instructions for proper disposal of the equipment at its end-of-life.
Specifies operating and storage requirements for temperature, humidity, and altitude.
Key warnings regarding hazardous atmospheres, materials, and electrical safety.
Lists relevant EU directives and safety/EMC standards the product complies with.
Detailed technical specifications for the Model 3500 shaker.
Detailed technical specifications for the Model 3750 shaker.
Detailed technical specifications for the Model 5000 shaker.
Detailed technical specifications for the Model 10000 shaker.
Detailed technical specifications for the Model 15000 shaker.
Steps to prepare the shaker before operation, including power and switch settings.
Instructions for setting the shaker speed and timer.
Procedure for safely stopping the shaker function and powering down.
Tips for balancing, stability, and automatic restart after power interruption.
Operation of the standby button and its indicator light for power status.
Explanation of the speed display and how to adjust speed using buttons.
Explanation of the time display and how to set the timer using buttons.
Steps to prepare the advanced shaker for operation.
Instructions for setting speed and using continuous or timed modes.
How to set a specific time for the shaker to operate.
Procedure to turn off the advanced shaker and return to standby mode.
Steps to activate the load sensing feature for overload protection.
Details on the additional overload protection feature and how to disable it.
How to silence or restore beeper operation.
Procedure for self-calibrating the advanced orbital shaker.
Information about the RS-232 serial port for data logging and control.
Tips for balancing, stability, and automatic restart after power interruption.
How to get technical assistance and find web resources.
Table listing problems, causes, and solutions for shaker issues.
Chart detailing universal and rubber mat platforms and their compatible shaker models.
Details on specialized platforms and their compatibility.
Capacity charts for stationary and pivoting test tube racks.
Capacity charts for PVC and stainless steel flask clamps.
Capacity chart for microplate clamps.
Details about the manufacturer, VWR International bvba.
Declaration of conformity with relevant EU directives and standards.
List of catalog numbers for VWR Orbital and Reciprocating Shakers.
