EasyManua.ls Logo

VWR Homogeniser - User Manual

Default Icon
52 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
en
fr
it
es
de
po
User Manual
Manuel d’utilisation
Manuale d’uso
Manual del usuario
Benutzerhandbuch
Manual do usuário
Catalog No Description
432-0366 Mini Bead Mill 230V, 300W
Mini Bead Mill
Homogeniser
User Manual

Table of Contents

Questions and Answers

  • D
    David RamirezAug 7, 2025
    Why is there no display on my VWR Laboratory Equipment screen?
    • J
      Jonathan WolfeAug 7, 2025
      There are a couple of reasons why there might be no display on the screen. First, check the main voltage to ensure it matches the unit's voltage requirement (100V-240V). Also, verify the unit is properly plugged in and replace any blown fuses. If the power supply is fine, the display screen might be faulty, in which case you should turn off the unit and contact the manufacturer for assistance.
  • B
    bullockmeghanAug 13, 2025
    What to do if my VWR Laboratory Equipment displays incomplete characters?
    • M
      Michelle JohnsonAug 13, 2025
      If the display screen shows incomplete or unusual characters, the CPU may need to be reset. To do this, turn off the unit, wait 30 seconds, and then turn it back on.
  • P
    Paul WrightAug 21, 2025
    What to do if VWR Homogeniser Laboratory Equipment says 'Close Door'?
    • R
      Randall CollinsAug 21, 2025
      If you are getting a 'Close Door' message, first check the lid latch for any obstructions. Press the lid to ensure it is properly seated and that the handle is closed. If this doesn't help, the detection system may be faulty.
  • R
    robinsondanielAug 29, 2025
    What to do if my VWR Homogeniser Laboratory Equipment powers on but the motor doesn't turn?
    • J
      Joshua HernandezAug 29, 2025
      If the unit powers on but the motor does not turn, it could be a faulty motor. Contact the manufacturer for assistance.

Summary

Intended Use

Technical Service

Web Resources

Access technical service, online catalog, and product information on the VWR website.

Contact Us

Reach your local VWR representative or visit www.vwr.com for technical assistance.

Warranty

Compliance with Local Laws and Regulations

Equipment Disposal

Unpacking

Overview

General Operation

Loading Sample Tubes

Changing the Tube Holder

Changing the Neck Gasket

Troubleshooting

Transporting the Mini Bead Mill

VWR Homogeniser Specifications

General IconGeneral
BrandVWR
ModelHomogeniser
CategoryLaboratory Equipment
LanguageEnglish

Related product manuals