Need help?Do you have a question about the VWR HIGH PERFORMANCE PIPETTOR and is the answer not in the manual?
General| Brand | VWR |
|---|---|
| Model | HIGH PERFORMANCE PIPETTOR |
| Category | Laboratory Equipment |
| Language | English |
Lists components included with single channel pipettors.
Lists components included with multichannel pipettors.
Identifies key parts of single and multichannel pipettors.
Steps to fit the tip-ejector extension on 2µL and 10µL models.
Steps to remove the tip-ejector extension.
Guidance on using the ejector spacer for short collar tips.
How to set the desired volume using the volumeter.
Lists volume increments for different pipettor models.
Steps to lock the selected volume for consistent results.
Steps to adjust the pipettor's volume using the calibration key.
Equivalence of volume per 1/8 turn for different models.
Guidance on attaching tips and pre-rinsing for accuracy.
Detailed steps for drawing liquid into the pipette tip.
Detailed steps for expelling liquid from the pipette tip.
Key recommendations for accurate and safe pipetting.
Recommended immersion depths and wait times for various models.
Information on pipettor stands and identification clips.
Details on serial numbers and barcodes for GLP.
Common issues and solutions for single channel pipettors.
Procedure to check for leaks in the pipettor.
Routine maintenance to keep pipettor in good condition.
How to change tip-ejector, tip-holder, and piston assembly.
Steps for cleaning and servicing the piston assembly.
Steps for replacing worn or damaged seals.
Routine maintenance to keep pipettor in good condition.
Instructions for removing and refitting the tip-ejector.
External and internal cleaning steps for single channel models.
Cleaning steps for multichannel models.
Procedures for chemical decontamination of pipettor parts.
Guidelines for steam autoclaving the pipettors.
Error limits for various single channel pipettor models.
Error limits for various multichannel pipettor models.
Recommendations for annual calibration and maintenance.
Information on accessing technical service and web resources.
Terms and conditions of the product warranty.
Instructions for the correct disposal of the pipettor.
To Next Page
