BEFORE FIRST USE
With the battery in place, plug the cable into the power inlet hole located on the side of the battery.
When charging, the blue battery indicator lights on the top of the main body will flash. As the
battery becomes more charged, the lights will remain solidly on. When all 3 lights have stopped
flashing and are solid blue, the battery is fully charged. Once fully charged, turn off the charger and
unplug from the power socket.
The battery can also be charged out of the main body by plugging the charger directly into the
power inlet hole located on the side of the battery as pictured below.
NOTE
:
In the event of a maintenance issue with the product such as a jammed brush roller, all
three BLUE indicator lights will flash on and off and the cleaner will cut out. At this stage, check
what may have caused the issue.
Ensure that the air vent, floor head, suction pipe and internal filter are free from blockages. Should
they be clogged, clear the blockage before attempting to use the vacuum again.
Remove any sharp or large objects from the system as these may damage the appliance
irreparably.
The blue lights will all go out and once the issue has been resolved the vacuum can be restarted.
To Next Page
Loading...
