TAKING CARE USING YOUR CLEANER
Switch off the vacuum cleaner immediately if the air intakes, the floor brushes or the telescopes tube becomes
blocked. Before starting the vacuum cleaner up again remove the substance causing the blockage:
1.Never use the vacuum cleaner in the immediate vicinity of fires or
radiators or any other appliance emitting heat. Do not suck up hot
objects such as cigarette ends or ashes.
2.Only place the plug in the socket when your hands are dry.
3. Please remove large of sharp objects from the floor before
using the vacuum cleaner to avoid any possible damage to it.
4.Do not pull by the mains cable when pulling out the plug.
USE
Vacuum cleaning
1.Before using the vacuum cleaner first pull out a sufficient length of mains cable and plug into the mains
socket. The yellow mark on the mains cable is the maximum length that must not be exceeded.
To switch on the device press the foot pedal button on the casing with your foot.
2. To rewind the mains cable, press the button
Hold the cable with one hand and guide the cable to ensure that it does not whip causing damage.
Don't forget to register for your 12 month guarantee at www.vytronix.com
using product code brandnew-vytronix-pet01
To Next Page
Loading...
