W.E.S.T. Elektronik PAM-193-P User Manual

Technical Documentation
PAM-199-P
Power amplifier for all typical proportional valves

W.E.S.T. Elektronik PAM-193-P Specifications

General

Brand	W.E.S.T. Elektronik
Model	PAM-193-P
Category	Amplifier
Language	English

Summary

General Information

Safety Instructions

Provides critical safety guidelines for device operation and handling.

Characteristics

Use and Application

Installation Instruction

Detailed steps for correctly installing the module in its environment.

Commissioning

Procedures for initial setup, configuration, and starting the device.

Function Modes and Technical Description

Control of Directional Valves (195)

Details on controlling directional valves using Function 195.

Control of Two Throttle and / or Pressure Valves (196)

Details on controlling throttle/pressure valves using Function 196.

Control of Proportional Valves by Preprogrammed Values and Ramp Times (197)

Details on controlling valves with preprogrammed values via Function 197.

Input Connection (Examples)

Illustrates various input connection examples for different signals.

Technical Data

Lists specifications, electrical data, and physical properties.

Parameter Description

FUNCTION (Function Mode)

Defines the main operational mode (195, 196, 197) of the module.

SENS (Failure Monitoring)

Activates/deactivates monitoring functions for various potential failures.

LIM (Signal Monitoring)

Monitors input signals for deviations and switches off on errors.

AIN (Analogue Input Scaling)

Scales the analogue input signal using linear equation parameters.

MIN (Overlap Compensation)

Compensates for valve overlap (dead band) for channel B.

MAX (Output Scaling)

Defines the maximum output signal or valve current for channel B.

CURRENT (Nominal Output Current)

Sets the nominal solenoid current, affecting DITHER and MIN/MAX.

PPWM (Solenoid Current Controller P Gain)

IPWM (Solenoid Current Controller I Gain)