waatr PureMax 4D - User Manual

Manual
Customer Service: hello@waatr.com • 1-833-642-7659
User Manual
Charging
To charge, place the magnetic charger
on top of the cap over the charging pins
and connect the USB plug to a wall
adapter. Full charge takes about 3-4
hours.
Breathing ORANGE
light while charging
Solid GREEN
light when fully charged
GREEN
light indicates
40% - 100%
charge
ORANGE
light indicates
11% - 39%
charge
RED
light indicates
1% - 10%
charge
Battery Life
Press the activation button
once to check the battery life.
Self-Cleaning Feature
To conserve battery, PureMax ships with the self-cleaning feature deactivated. To activate the self-cleaning
feature, LONG PRESS the activation button for 3 seconds; the indicator light will blink GREEN upon successful
activation. To deactivate this feature, LONG PRESS the activation button for
3 seconds; the indicator light will blink RED upon successful deactivation. Once self-cleaning mode is turned
ON, PureMax will automatically activate once every hour for 15 seconds to keep the bottle odor-free. While
self-cleaning is in-progress, indicator light will breathe BLUE.
UV-C Smart Safety Sensor
To protect users from accidental eye exposure, PureMax is built with a
smart safety sensor. This sensor deactivates the UV-C LED once the cap
is removed from the bottle. If the user removes the cap from the bottle during
Pure or Ultra-Pure Mode or self-cleaning mode is in progress, the indicator LED
will blink RED for 3 seconds and then the UV-C LED will turn o. This prevents
user from accidental exposure to the UV-C light.
Pure Mode Purification
Press activation button twice to activate
Pure Mode. This mode will activate UV-C
LED for 1 min. to purify water. During this
process, the indicator light will breathe
BLUE. Once the purification is completed,
the indicator light will flash GREEN.
Press activation button thrice to activate
Ultra-Pure Mode. This mode will activate UV-C
LED for 3 min. to maximize purification,
destroying 99.999999% of germs. During this
process, the indicator light will breathe BLUE.
Once the purification is completed, the indicator
light will flash GREEN.
Press 2X for
Pure Mode
Ultra-Pure Mode Purification
Press 3X for
Ultra-Pure Mode
Drink Water Reminder
To conserve battery, PureMax ships from with
the drink reminder feature deactivated. To
activate the drink reminder feature, press the
activation button 5 times; the indicator light
will blink ORANGE upon successful activation.
To deactivate this feature, press the activation
button 5 times; the indicator light will blink
RED upon successful deactivation. Once the
drink reminder is turned ON, PureMax will slow
blink GREEN 3 times every 30 minutes for up
to 2 hours. If the user does not remove the cap
for more than 2 hours, the drink reminder will
go into standby mode until the user removes
the cap.
Flashing RED:
Hydration Reminders:
OFF
Flashing ORANGE:
Hydration Reminders:
ON
Flashing GREEN:
Hydration Reminders:
IN PROGRESS
Flashing RED
Smart Safety Sensor
ACTIVATED
Scan for
instructional
videos
GREEN
Self-cleaning
ON
RED
Self-cleaning
OFF
BLUE
Self-cleaning
IN PROGRESS

Summary

Charging and Battery Life

Charging Process

Charge the PureMax cap using the magnetic charger and USB adapter. Full charge takes 3-4 hours.

Battery Level Indicators

Check battery life by pressing the activation button. Lights indicate charge status: Green (40-100%), Orange (11-39%), Red (1-10%).

Purification Modes

Pure Mode Purification

Activate UV-C LED for 1 min by pressing the button twice. Light breathes BLUE during purification and flashes GREEN upon completion.

Ultra-Pure Mode Purification

Activate UV-C LED for 3 min by pressing the button thrice. Light breathes BLUE during purification and flashes GREEN upon completion.

Advanced Features

Self-Cleaning Feature

Activate/deactivate by long-pressing the button. Automatically activates hourly for 15 seconds to keep the bottle odor-free.

Drink Water Reminder

Activate by pressing the button 5 times. Slowly blinks GREEN 3 times every 30 minutes for up to 2 hours.

UV-C Smart Safety Sensor

Deactivates UV-C LED when the cap is removed to prevent accidental eye exposure.

Quick Start Guide

Charge the Cap

Charge the PureMax cap fully before use. Indicator lights show battery status.

Prime and Install Filter

Soak the filter for 15 minutes, flush for 2 minutes, then install into the cap.

Fill and Purify

Fill the bottle with water, screw on the cap, and activate purification modes.

Drink

Drink confidently once the purification process is complete.

Product Information and Support

UV Sanitizer Application

Sanitize objects like phones, keys, or masks by placing them inside the bottle during Ultra-Pure Mode.

Bottle and Filter Options

PureMax caps fit various bottle sizes. Choose from Purist, Artesian, or Alkaline filter cartridges.

Safety and Maintenance

Avoid UV-C light exposure, hand wash only, and change filters every two months.

Warranty Details

WAATR offers a lifetime warranty against defects in materials and workmanship.

waatr PureMax 4D Specifications

General

Filter Replacement Indicator	Yes, LED indicator
Material	BPA-free plastic
Bottle Compatibility	Fits most standard mouth bottles
Charging Time	Approximately 2 hours
Certifications	NSF/ANSI 42, NSF/ANSI 53