Need help?Do you have a question about the Wachendorff OPUS A3 and is the answer not in the manual?
Describes types of instructions and hazard levels.
General safety guidelines and user responsibilities.
Defines personnel qualified for operation and installation.
Details voltage requirements and protection.
Rules for device interventions and manufacturer liability.
Critical safety warnings for device operation and handling.
Illustrates typical applications and system integration.
Overview of the OPUS A3 hardware components and features.
Details specific features and specifications of the OPUS A3 ECO variant.
Details specific features and specifications of the OPUS A3 STANDARD variant.
Methods for programming and integrating the OPUS A3.
Summary of key features and capabilities of the OPUS A3.
Details on available kits for application development.
Instructions for verifying delivered components.
Guidelines and accessories for installing the unit.
Step-by-step guide for dashboard mounting of STANDARD variant.
Specifications for creating a dashboard cut-out.
Details of the mounting cover for the STANDARD variant.
Step-by-step guide for dashboard mounting of ECO variant.
Specifications for creating a dashboard cut-out for ECO variant.
Details of the mounting cover for the ECO variant.
Pinout diagrams and electrical connection details for the unit.
Guidance on protecting unused plugs from humidity.
Details on power supply connection and voltage ranges.
Procedures for initial power-up and boot process.
Recommended methods for cleaning and maintenance.
Detailed physical dimensions for the STANDARD model.
Detailed physical dimensions for the ECO model.
Comprehensive technical specifications and features comparison.
Information on environmental standards and compatibility.
Compliance with EU directives for electromagnetic compatibility.
Type approval information based on EU directives.
Details on the unit's protection against foreign objects and water.
Standards for electrical loads and environmental testing.
Standards for mechanical loads and environmental testing.
Standards for climatic conditions and temperature ranges.
Standards for chemical resistance and environmental testing.
Official statements of product compliance with directives.
EC Declaration of Conformity for the OPUS A3 ECO model.
EC Declaration of Conformity for the OPUS A3 STANDARD model.
General| Protection class | IP65 |
|---|---|
| Interfaces | CAN |
| Measurement Range | 0..360° |
| Output Signal | RS232 |
| Supply Voltage | 10..30 VDC |
| Operating Temperature | -20°C to +70°C |
| Housing Material | Aluminium |
| Shaft Diameter | 10 mm |
To Next Page