wc_si000408gb.fm
18
Labels BS 50-2
D
Warning!
Springs are compressed. Release cover slowly to avoid
spring ejection.
See the Repair Manual for proper disassembly
instructions.
E
Move lever forward to stop machine. Move lever
backward to run machine.
This label is molded into the cover. If the label becomes
illegible, the cover must be replaced. Refer to the Parts
Book for ordering information.
F
For optimal control, performance, and minimal hand/arm
vibration, grasp handle as shown.
Read the Operator’s Manual.
This label is molded into the cover. If the label becomes
illegible, the cover must be replaced. Refer to the Parts
Book for ordering information.
G
Guaranteed sound power level in dB(A).
To Next Page
Loading...
