Wacker Neuson BS 50-2 User Manual

wc_si000408gb.fm
20
Labels BS 50-2
M
This rammer engine requires a two-cycle gasoline/oil
mixture (50:1).
With Wacker Neuson 2-cycle or other fully synthetic oil
meeting the NMMA TC-W3, JASO FD, or ISO-L-EGD
specification, a ratio from 50:1 to 100:1 can be used.
This label is molded into the cover. If the label becomes
illegible, the cover must be replaced. Refer to the Parts
Book for ordering information.
N
Turtle = Idle/slow engine speed
Rabbit = Full/fast engine speed
This label is molded into the cover. If the label becomes
illegible, the cover must be replaced. Refer to the Parts
Book for ordering information.
O
Move the throttle to the IDLE position.
Close the choke.
P
WARNING
Operation of this equipment may create sparks that can
start fires around dry vegetation. A spark arrester may
be required. The operator should contact local fire
agencies for laws or regulations relating to fire
prevention requirements.
--
This machine may be covered by one or more patents.
170731
50:1
:
1
181641
2
WARNING
Operation of This Equipment May Create Sparks That Can Start Fires Around Dry
Vegetation. A Spark Arrestor May be Required. The Operator Should Contact Local
Fire Agencies For Laws or Regulations Relating to Fire Prevention Requirements.
Per CAL. PRC. CODE

Wacker Neuson BS 50-2 Specifications

General

Brand	Wacker Neuson
Model	BS 50-2
Category	Vibratory rammers & tampers
Language	English