Wacker Neuson BS 60-2 - Page 20

Labels BS 60-2 / BS 70-2
20 wc_si000475gb.fm
M
This rammer engine requires a two-cycle gasoline/oil
mixture (50:1)
With standard two-cycle oil use 50:1 ratio.
With Wacker Neuson Neuson two-cycle or other oil
meeting the NMMA TC-W3 specification, a ratio from
50:1 to 100:1 can be used.
This label is molded into the cover. If the label
becomes illegible, the cover must be replaced.
Refer to the Parts Book for ordering information.
N
Turtle = Idle/slow engine speed
Rabbit = Full/fast engine speed
This label is molded into the cover. If the label
becomes illegible, the cover must be replaced.
Refer to the Parts Book for ordering information.
O
1. Move the throttle to the IDLE position.
2. Close the choke.
--
This machine may be covered by one or more patents.
Ref. Label Meaning