Wacker Neuson BS50-2 User Manual

wc_si000837gb_FM10.fm
28
Rammer
Labels
J
Engine oil tank
■ Use only Wacker Neuson two-cycle or other fully syn-
thetic oil meeting the NMMA TC-W3, JASO FD, or
ISO-L-EGD specification.
Read the Operator’s Manual.
K
WARNING
Operation of this equipment may create sparks that can
start fires around dry vegetation. A spark arrester may
be required. The operator should contact local fire
agencies for laws or regulations relating to fire
prevention requirements.
L
This machine may be covered by one or more patents.
M
This spark ignition system complies with the Canadian
standard ICES-002.
N
■ Use only Wacker Neuson two-cycle or other fully syn-
thetic oil meeting the NMMA TC-W3, JASO FD, or
ISO-L-EGD specification.
■ A gasoline/oil ratio in a range from 50:1 to 100:1 can
be used. For optimum engine performance and dura-
bility, a 100:1 ratio with a fully synthetic oil meeting the
specification described above is preferred.
O
Adjusting tool label
Refer to Selecting Ramming Stroke and Adjusting
Ramming Stroke for explanation of this label.
Read the Operator’s Manual
JASO FD
JASO FD
ISO-L-EGD
ISO-L-EGD
TC-W3
TC-W3
Operation of This Equipment May Create Sparks That Can Start Fires
Around Dry Vegetation. A Spark Arrestor May be Required. The
Operator Should Contact Local Fire Agencies For Laws or Regulations
Relating to Fire Prevention Requirements.
WARNINGWARNING
Per CAL. PRC. CODE ÿ 4442.6(a) Per CAL. PRC. CODE ÿ 4442.6(a)
5200014248
:
:
JASO FD
JASO FD
ISO-L-EGD
ISO-L-EGD
TC-W3
TC-W3

Wacker Neuson BS50-2 Specifications

General

Engine Model	Wacker Neuson WM 80
Displacement	80 cm³
Percussion Rate	700 blows/min
Fuel Type	Gasoline/oil mixture
Fuel Tank Capacity	3.0 liters
Engine Output	1.8 kW