EasyManuals Logo

Wacker Neuson BS70-4 User Manual

Wacker Neuson BS70-4
50 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
4 Safety and information labels
100_0201_ls_0004.fm 15
Item Label Description
1 2-Takt 4-Takt 1. Put the throttle lever in the IDLING position.
2. Activate the choke.
2 2-Takt 4-Takt Danger of suffocation
Engines give off carbon monoxide.
Do not operate the machine in closed spaces.
No sparks, flames or burning objects are permitted
near the machine.
Turn off the machine before refueling.
Warning
Wear ear protection.
Read operator's manual.
Start engine
1. Put the throttle lever in the IDLING position.
2. Press the purge bulb 10x.
3. Activate the choke.
4. Pull the starter rope of the recoil starter.
5. Put the throttle lever in the FULL THROTTLE position.
Decommissioning the machine
1. Put the throttle lever in the OFF position.
Hold the control handle left and right for an optimal
control, performance and minimal hand-arm-vibrations.
3 Turtle = idling/low engine speed
Hare = high/fast engine speed
4 Raise and transport the machine by the central lifting
point.
Only use suitable and tested lifting gear and tackle
(safety load hooks) of sufficient lifting capacity.
Do not lift the machine with an excavator bucket or
forklift.
US

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Wacker Neuson BS70-4 and is the answer not in the manual?

Wacker Neuson BS70-4 Specifications

General IconGeneral
BrandWacker Neuson
ModelBS70-4
CategoryVibratory rammers & tampers
LanguageEnglish

Related product manuals