5-30 BA D18 us* 1.1 * D18b510.fm
5 Operation
Immobilizer (option)
A = starting key (blue)
For starting the machine. Scope of delivery includes 2 keys.
B = master key (red)
Store the master key in a safe place. It can only be used for coding new
starting keys.
A new immobilizer must be installed if the master key is lost.
The machine can be started without performing any further settings.
Coding new starting keys
1. Insert master key B in the starter and turn it to position 1 for a
maximum five seconds.
2. Remove master key B.
3. Keep master key B at least 50 cm (19.68 in) away from the starter.
4. Within 15 seconds, turn keys requiring coding to position 1 for at least
one second.
5. Repeat step 4 if more starting keys require coding.
➥ The keys are coded now.
Coding can be performed for a maximum of 10 starting keys.
The procedure is automatically cancelled if no key requiring coding is
detected by the system within 15 seconds.
Deleting coded keys
Deleting all coded keys is necessary whenever a coded key is lost.
The master key code is not deleted during deletion.
1. Insert master key B in the starter and turn it to position 1 for at least 20
seconds.
2. Code the starting keys.
To Next Page
Loading...
Need help?
General
