7-38 BA D18 us* 1.1 * D18w710.fm
7 Maintenance
Fuses and relays
• Blown fuses indicate overloading or short circuits. Have the electrical
system checked by a Wacker Neuson service center.
• Only use fuses with the specified amperage.
– see chapter “ Fuse box” on page 9-6.
Battery state of charge
Have this checked only by a Wacker Neuson service center.
Charging the battery
Have this performed only by a Wacker Neuson service center.
Replacing the battery
The battery is maintenance-free. However have the battery checked at
regular intervals to ensure that the electrolyte level is between the MIN
and MAX marks.
Checking the battery requires it to be removed and must be performed by
a Wacker Neuson service center.
Follow the specific battery safety instructions.
In order to avoid damage to the engine electronics, do not disconnect the
battery while the engine is running.
Battery master switch
Battery master switch A is located behind the maintenance flap on the left.
Immediately actuate battery master switch A in case of a short circuit.
Contact a Wacker Neuson service center.
To Next Page
Loading...
Need help?
General
