2-16 OM D18 us* 1.1 * Sicherheit_25022014.fm
2 Safety
Modifications and spare parts
• Do not modify the machine and the work equipment/attachment (for
example the safety equipment, lights, tires, straightening and welding work).
• Modifications must be approved by the manufacturer and performed by
a Wacker Neuson service center.
• Use only original spare parts.
Protective structures
• The cabin, rollbar and protective screen are tested protective structures and
may not be modified (for example no drilling, bending, welding).
• Perform a visual check according to the maintenance plan (for
example check fastenings for damage).
• If damage or defects are detected, have them immediately checked
and repaired by a Wacker Neuson service center.
• Have retrofitting work only performed by a Wacker Neuson service center.
• Replace self-locking fasteners (for example self-locking nuts) by new
ones after removing them.
To Next Page
Loading...
Need help?
General
