4-12 BA D18 us* 1.1 * D18i400.fm
4 Putting into operation
FOPS level II cabin (option)
Crushing hazard due to falling objects!
Causes serious injury or death.
► Install a protective FOPS structure in areas with danger of falling
objects.
The cabin complies with the FOPS level II requirements according to EN
ISO 3449:2008
► The machine owner must ensure that the hazard situation is evaluated
and that the national regulations are observed.
► The machine owner must ensure that only work is performed that does
not require any higher protection.
► Accidents cannot be fully avoided despite equipping a machine with
protective structures.
To Next Page
Loading...
