BA E16 en* 1.0 * E16_10_510.fm 5-65
Operation 5
Working with the falling force by lowering the attachment
Do not use the falling force of the attachment as a hoe, hammer or pile-
driver.
Working with the falling force by lowering the vehicle
Do not use the dead weight of the vehicle for work.
Use the force of the hydraulic cylinders exclusively.
Fully lowering the stabilizer blade
Apply the full weight of the vehicle over the entire width of the stabilizer
blade when using it for stabilization.
Disable floating position (option).
Protecting the stabilizer legs/blade against shocks
The stabilizer blade or stabilizer blade cylinder can be damaged when the
stabilizer blade hits against obstacles.
To Next Page
Loading...
