BA E16 en* 1.0 * E16_10_900.fm 9-15
Technical data 9
Determining the loading weight
The basis for calculating the loading weight is the shipping weight
indicated on the vehicle nameplate. Add subsequently installed options
and attachments (e.g. bucket, Easy Lock, breaker console) to the shipping
weight. Add fuel depending on the tank capacity.
Option
1
ET35
kg (lbs)
EZ36
kg (lbs)
VDS travel gear 233 (514) 260 (573)
Extra weight 153 (337) 153 (337)
Steel tracks 300 mm 122 (269) 122 (269)
Swiveling dozer blade 100 (220) 100 (220)
Cab 68 (151) 68 (151)
Hydraulic thumb 59 (130) 59 (130)
Air conditioning 52 (116) 52 (116)
Front Guard 33 (73) 33 (73)
Safe load indicator + load hook 21 (46) 21 (46)
Long stick 16 (36) 16 (36)
3rd control circuit with proportional controls 11 (25) 11 (25)
Preparing the Powertilt 11 (25) 11 (25)
Quickhitch-ready 10 (22) 10 (22)
Attachments – see chapter “ Technical data of attachments” on page 9-17
Full fuel tank 36 (79)
1. The weight indications for options exclusively refer to Wacker Neuson original accessories.
To Next Page
Loading...
Need help?
General
