BA E16 en* 1.0 * E16_10_200a.fm 2-19
Safety 2
Hydraulic and compressed-air system
• Check all lines, hoses and screw connections regularly for leaks and
visible damage.
• Splashed oil can cause injury and fire.
• Leaking hydraulic and compressed-air lines can cause the full loss of
the brake effect.
• Have damage and leaks immediately repaired by an authorized
service center.
• Have hydraulic hoses replaced by an authorized service center within
stipulated intervals even if no visual defects can be detected.
Electrical system
• Use only fuses with the specified current rating.
• In case of damage or malfunction in the electrical system:
- Put the vehicle out of operation immediately and secure it against
restart
- Disconnect the battery or operate the battery master switch
- Have the malfunction repaired
• Ensure that work on the electrical system is only performed by trained
technical personnel.
• Have the electrical system checked regularly and malfunctions
repaired immediately (for example loose connections, scorched
cables).
• The operating voltage of machine, the attachment and the trailer must
be the same (for example 12 V).
To Next Page
Loading...
