Operation GPS 8500 / GPS 9700
26
2.15.5 Push choke in as engine warms (a2).
2.15.6 Place main circuit breaker in closed (l) position and place auto idle
switch in ON (l) position. Allow engine to warm up and check function
of GFI circuit breakers before attaching loads to generator (see
Ground Fault Circuit Interrupt).
2.16 To Stop
2.16.1 Disconnect all loads from generator and place main circuit breaker in
open position.
2.16.2 Turn engine switch to the stop position (d1).
2.16.3 Close fuel valve (b2).
a2
a1
b2
b1
d1
d2
d3
c
To Next Page
Loading...
