EasyManuals Logo

Wacker Neuson GS 5.6A User Manual

Wacker Neuson GS 5.6A
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #32 background imageLoading...
Page #32 background image
Maintenance G/GS 5.6A
wc_tx000164gb.fm 30
5.5 Spark Plug
See Graphic: wc_gr000028
Clean or replace the spark plug as needed to ensure proper operation.
Refer to the engine owner’s manual.
The muffler becomes very hot during operation and remains hot for a
while after stopping the engine. Do not touch the muffler while it is hot.
Note: Refer to the Technical Data for the recommended spark plug
type and the electrode gap setting.
5.5.1 Remove the spark plug and inspect it.
5.5.2 Replace the spark plug if the insulator is cracked or chipped.
5.5.3 Clean the spark plug electrodes with a wire brush.
5.5.4 Set the electrode gap (a).
5.5.5 Tighten the spark plug securely.
CAUTION: A loose spark plug can become very hot and may cause
engine damage.
WARNING

Other manuals for Wacker Neuson GS 5.6A

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Wacker Neuson GS 5.6A and is the answer not in the manual?

Wacker Neuson GS 5.6A Specifications

General IconGeneral
BrandWacker Neuson
ModelGS 5.6A
CategoryPortable Generator
LanguageEnglish

Related product manuals