Maintenance PD 2A/3A
wc_tx000229gb.fm 24
5. Maintenance
5.1 Periodic Maintenance Schedule
The chart below lists basic machine and engine maintenance. Refer to
your engine Operator’s Manual for additional information on engine
maintenance.
Daily
before
starting
After
first
20 hrs.
Every 2
weeks
or 25
hrs.
Every
100
hrs.
Every
300
hrs.
Check fuel level.
Check engine oil level.
Inspect air filter. Replace as needed.
Check external hardware.
Change engine oil.
Check oil level in pump gear case.
Grease pump connecting rod bearing.
Clean sediment cup on engine fuel
system.
Check and clean spark plug.
Check and adjust valve clearance.
Change oil in pump gear case.
To Next Page
Loading...
