20
OPERATOR CONTROLS
7.7 – AIR FILTER CLOGGED INDICATOR
When the indicator is on, it signals inefficiency of the suction system - filter cartridge
clogged.
7.8 – HYDRAULIC SERVO-CONTROL BLOCK WARNING LIGHT
SWITCHED ON: Hydraulic commands deactivated (safety bar raised).
SWITCHED OFF: Hydraulic commands activated (safety bar lowered).
7.9 – HEADLAMP INSERTION WARNING LIGHT
7.10– HOUR COUNTER
Signals the progressive working time. Functions with the engine running.
8 – 12V UNIPOLAR OUTLET
Allows low-tension fitting usage.
9 – EMERGENCY LIGHT SWITCH
Controls the simultaneous functioning of the four direction indicators.
Insert the switch every time a potential danger exists and in EMERGENCY situations.
10 – FLASHLIGHT DEVICE SWITCH
Commands the device positioned above the cabin connected through a plug at the side of the
left working light. ALWAYS SWITCHED ON DURING CIRCULATION ON ROADS
11 – WORKING LIGHT SWITCH
Commands the working lights situated on the front part of the cabin.
12 – AVAILABLE (WINDSCREEN WIPER COMMAND ON MACHINES EQUIPPED WITH CABIN
FRONT DOOR)
13 – AVAILABLE (HEATING FAN COMMAND SWITCH (2 SPEED) IN MACHINES EQUIPPED
WITH HEATING PLANT
14 – 3-POSITION SWITCH FOR LIGHTING PLANT CONTROL
(POSITION AND HEADLIGHTS)
15 – THREE-POSITION SWITCH FOR DIRECTION INDICATOR COMMAND
FORWARD: turn left
CENTRAL: neutral
BACKWARD: turn right
To Next Page
Loading...
