EasyManuals Logo

Wacker Neuson SW10 User Manual

Wacker Neuson SW10
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #46 background imageLoading...
Page #46 background image
46
MAINTENANCE
SUPPLYING, VERIFICATIONS, DIESEL MOTOR COOLING SYSTEM CONTROLS:
- The radiator is situated in the rear part of the machine, above the diesel engine.
- For capacity and filling refer to the RE-FUELLING TABLES
- A special warning light (Fig.1 - ref. 7), on the left dashboard, signals the inefficiency of
the diesel engine cooling circuit. Checking and top-up of the level of liquid must be carried
when the engine is cold. If the cap of the expansion tank “A” of the cooling liquid
positioned at the side of the radiator is still hot use a protective glove or rags soaked in
cold water.
- Never place the face over the cap when opening.
DANGER OF BURNS
DANGER OF SCALDING
The engine cooling liquid is maintained at a service
temperature using a fan positioned beneath the
radiator and is activated by a hydraulic engine.
If it doesn’t function or functioning is anomalous
check the pressure of engine connection “1” of
the fan.
The pressure detected must be 100 bar.
If this is not detected, contact CUSTOMER SERVICE
RADIATOR

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Wacker Neuson SW10 and is the answer not in the manual?

Wacker Neuson SW10 Specifications

General IconGeneral
BrandWacker Neuson
ModelSW10
CategoryCompact Loader
LanguageEnglish

Related product manuals