Customize advanced Wacom Display Settings
Click Advanced in Wacom Display Settings to customize advanced display settings such as aspect ratio, sharpness, auto
power down, and more.
Important: The available options may vary depending on your device.
Change the Aspect Ratio so that the screen displays the ratio of width to height that you want.
Select Full to fill the entire screen.
Select Aspect to fill as much of the screen as possible while maintaining the correct aspect ratio.
Select 1:1 to display a 1:1 screen aspect ratio.
Move the Sharpness slider to the right for a sharper display and to the left for a softer one.
Turn Uniformity Compensation to On to automatically adjust different areas of the screen with respect to the center. This
results in uniform brightness and color over the entire screen.
Turn Dynamic Contrast to On so that your screen is automatically adjusted to maintain a constant contrast.
Turn Energy Smart to On so that your pen display goes to sleep if you do not interact with it for more than a few minutes.
Start LCD Conditioning to automatically adjust the display so that instances of color do not remain on the screen for long
periods of time. This prevents image persistence.
Auto Power Down is On by default so that your pen display automatically powers off if you do not interact with it for over
120 minutes.
Click Factory Reset to return the display settings to their defaults.
Tip: If you change display settings and your screen becomes too dark to see the Factory Reset button, you can press CTRL +
ALT + R on your keyboard to reset display settings to their defaults.