WACOM DTH-2242 User Manual

Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
 Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority
to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.

This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.

This Class [B] digital apparatus complies with Canadian ICES-003.


WACOM DTH-2242 Specifications

General

3D	No
Pixel pitch	0.25 x 0.25 mm
Aspect ratio	16:9
Screen shape	Flat
Response time	14 ms
Display diagonal	21.5 \
Touchscreen type	Tabletop
Display brightness	210 cd/m²
Display technology	LCD
Contrast ratio (typical)	900:1
Display number of colors	16.78 million colors
Display diagonal (metric)	54.6 cm
Certification	FCC, CE, VCCI, EDID 1.3, C-tick, BSMI, MIC, CCC, GOST-R, CB, J-MOSS, RoHS
Product color	Black
Placement supported	Horizontal
Tilt angle range	17 - 72 °
Depth (without stand)	55.5 mm
Height (without stand)	385 mm
Weight (without stand)	6550 g
Display viewable area (HxV)	475 x 267 mm
Number of products included	1 pc(s)
Mean time between failures (MTBF)	30000 h
DVI-I ports quantity	1
USB Type-A downstream ports quantity	2
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	1 W
Power consumption (typical)	45 W

Weight and Dimensions

Width (without stand)	566 mm