The Nixe Black Silver Hair Trimmer (Model TW003) is a professional-grade cutting machine designed for precision hair grooming. It combines innovation and technology to deliver high-quality performance for demanding customers.
Function Description
The Nixe Black Silver Hair Trimmer is primarily used for cutting and trimming hair. It operates with a powerful DC motor and features durable 3Cr13 steel blades for efficient and precise cutting. The device is designed for professional use, ensuring reliable performance and excellent results. It can be used without a comb for very short cuts or with one of the four included combs to achieve different hair lengths.
Important Technical Specifications
- Input Voltage (AC/DC adapter): 100-240 V
- Frequency: 50/60Hz, 0.2 A
- Power: 10 W
- Speed: 7000 rpm
- Motor Type: DC motor
- Battery: 1800 mAh lithium battery
- Usage Time: 150 minutes
- Charging Time: 2.5 hours
- Blades: 3Cr13 steel
- Combs: 4 combs (1.5 mm, 3 mm, 6 mm, 9 mm)
- Cutting Lengths (without comb): 0.2 mm
- Lifetime: 500 hours
- Weight: 171 g
- Noise Level: <68 dB
- Blade Temperature: <50°C
- Included Accessories: Lubricant and brush
Usage Features
The trimmer is straightforward to use, with a simple ON/OFF button for operation.
Loading the Machine:
- Connect the charger cable to the connector at the bottom of the cutting machine.
- Connect the power plug to the mains. The indicator light will illuminate red during charging and turn green when charging is complete.
- For the first use, fully charge the battery. Once charged, disconnect the machine from the mains.
Using the Cutting Machine:
- Before use, apply a few drops of lubricating oil to the blades.
- Press the power button to start the blades.
- Pass the machine over the desired cutting area.
- Press the OFF button when finished.
Cutting with 5 Measures:
The machine can be used to cut hair without a comb for a very close trim (0.2 mm) or with one of the four included combs (1.5 mm, 3 mm, 6 mm, 9 mm) to achieve different hair lengths. To adjust the hair size, simply select the appropriate comb.
Adjusting the Blades and Combs:
- To install combs: Align the edge of the comb with the edge of the blade (1) and push forward slightly to assemble (2).
- To dismantle combs: Simply pull the comb tightly from point (2).
- Always ensure the machine is switched off when adjusting combs.
Removal and Installation of Blades:
- Removal:
- Use a screwdriver to remove the screws, then loosen and remove the cutting head.
- Use your other hand to hold the blades to prevent them from falling.
- Installation:
- Ensure the blade spring (A) is aligned with the top of the blade (B).
- Fit the two fixed screws and hold them tight.
- Tighten the screws with a screwdriver to ensure the blade head does not fall off.
- Tip: Do not disassemble the blade head if you are not qualified to do so.
Maintenance Features
Cleaning the Blades:
- Clean the blades with the provided cleaning brush after each use to remove hair and debris.
Blade Maintenance:
- Before or after each use, apply a few drops of lubricating oil to the blades as shown in the manual's illustration to ensure smooth operation and prolong blade life.
Precautions
- Do not disassemble the product.
- Do not wash the cutting machine with water; keep it away from moisture during operation.
- Clean the product with a small damp cloth or neutral liquid soap. Do not use solvents.
- Never recharge the machine at temperatures above 40°C or below 0°C.
- A slight heating during operation or recharging is normal.
- The appliance is intended for professional use.
- Cleaning and maintenance should not be carried out by children without supervision.
- Children aged 8 and above, and persons with reduced physical, sensory, or mental capabilities, or lack of experience, can use the appliance if supervised or instructed on safe use and understanding of hazards. Children should not play with the cutting machine.
Warranty
The product comes with a 6-month warranty against manufacturing defects from the date of purchase. The warranty does not cover damage resulting from improper use or failure to follow the manufacturer's instructions. The battery and blades are quick-wear parts and are excluded from the warranty.
This product complies with CE Marking. The European Declaration of Conformity and the digital user manual are available online at wadprofessional.com.
Need help?
General
To Next Page