10 11
Removal and installation
of the blades
Tighten the screw with a screwdriver to
ensure that the blade head does not fall off.
TIP: Do not disassemble the blade head if you do not
think you are qualified to do so.
3
Installation of the blades:
The blade spring (A) must be aligned with the
top of the blade (B).
Then fit the two fixed screws and hold
them tight.
1
2
Blade maintenance:
· Before or after use, apply a few drops of oil as shown
in the picture.
Cleaning and
Maintenance
Cleaning of the blades:
· Clean the blades with the cleaning brush provided.
To Next Page
Loading...