Wagan Mini Cycle - Using Hand Grips; Adjusting Tension; Replacing the Battery

Mini Cycle by Wagan Tech
www.wagan.com
6
USING HAND GRIPS
SCAN TIME DIS COUNT
T-COUNT CALORIES
1. Detach the foot pedals using the wrench.
2. Attach the hand grips in the same manner.
3. Place the Mini Cycle on a table or other flat surface high enough to operate
comfortably.
ADJUSTING TENSION
Twist the tension valve at the back of the Mini Cycle to increase or decrease the ten-
sion.
REPLACING THE BATTERY
Lift up the display from the main cycle unit. The battery is attached to the bottom of
the display.