WAGNER INSTRUMENTS
P.O. Box 1217, GREENWICH, CT 06836-1217, USA
TELEPHONE: (800) 345-4188 or (203) 869-9681
FAX: (800) 443-4149 or (203) 869-9871
www.wagnerforce.com
Warranty and Limitation of Liability: Wagner Instruments
expressly warrants to its buyer for one year from the date of
purchase that the goods sold shall be free from defects in
workmanship and materials under normal conditions. Wagner
Instruments will, at its option, replace, repair, or refund in full, the
purchase price of the instrument or any part thereof which in our
opinion is defective, provided the instrument has not been
subjected to tampering, abuse or exposed to highly corrosive
conditions. An instrument that has been improperly used cannot
be considered under this warranty. We make no warranties,
expressed or implied, including, without limitation, any warran-
ties of fitness or merchantability, except as expressly set forth
above, we shall not be liable for any anticipated or lost profits,
incidental damages, consequential damages, costs, time charges,
or other losses in connection with the instrument or replacement
parts thereof. If a manufacturing defect is found, we will replace
or repair the instrument or any defective part thereof without
charge; however, our obligation hereunder does not include the
cost of transportation which must be borne by the customer. We
assume no responsibility for damage in transit, and any claims for
such damage should be presented to the carrier by the purchaser.
In addition, we may, at our option, take back the defective
instrument and refund, in full settlement, the purchase price thereof.
OPERATION MANUAL
FDL SERIES
FORCE DIAL™
Push-Pull Force Gage
FDL shown on FTS test stand.
FDL shown with optional handles.
Optional accessories.
1/97 fdl1000
FDL
PULL
PUSH
9
230
8
200
2.6
67
.4
10.4
1.9
49
#10-32 THD.
#10-32 THD.
.3/7 LONG
BOTH ENDS
3.3
84
1.125
28.6
1.125
28.6
2.0
51
.7
17.5
.2/5.1 O.D.
HOLE FOR
.187/4.75 DOWEL
PIN - THRU
#10-32
THD.
.8
20.5
NOTE: SPECIFICATIONS, DIMENSIONS AND APPEARANCE SUBJECT TO CHANGE.
INCHES
MM
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
