1
TwinControl
ASSEMBLY MANUAL
VERSION 01/2014 ORDER NUMBER DOC2336796
Incorrect maintenance/repair!
Risk of injury and damage to the device.
Have repairs and part replacements carried out only by specially
trained sta or a WAGNER service center.
Before all work on the device and in the event of work
interruptions:
- Switch o the energy/compressed air supply.
- Relieve the pressure from the spray gun and device.
- Secure the spray gun against actuation.
Observe the operating manual and service manuals at all times
when carrying out work.
WARNING
1 GENERAL SAFETY INSTRUCTIONS
ASSEMBLY MANUAL
for TC Generator Conversion Set (Spare Parts, Order No.
2332859)
for Installation in TwinControl Control Unit
1.1 PREFACE
This assembly manual contains information about removing and installing the spare parts set.
Further information, such as information relating to operation, repair and maintenance
of the TwinControl system and the system's safety notices, is contained in the operating
manual.
➞ Only use the device in compliance with the operating manuals for the TwinControl
2K system.
This equipment can be dangerous if it is not installed/removed and operated in accordance
with the instructions in this manual. Compliance with these instructions constitutes an
integral component of the warranty agreement.
Operating manual for TwinControl:
Language Order No. Language Order No.
German 2339287 English 2339321
French 2339322 Italian 2339323
Spanish 2339330
Compact disk (CD) TwinControl
The TwinControl operating manuals, spare parts catalogs and the operating documents
for the individual components are also available as PDF les on a compact disk (CD).
The CD is included in the system's scope of delivery.
The Order No. is: 2339342
To Next Page
Loading...
