GB
14
8. Then empty the container completely. Always keep the container seal free of
coating material residue and check for damage.
9. Clean the outside of the spray gun and container with a cloth soaked in solvent or
water.
10. Unscrew the union nut and remove the air cap and nozzle. Clean the air cap and
nozzle with a brush and solvent or water.
Caution! Never clean nozzle or air holes in the spray gun with sharp metal
objects.
Maintenance
Change the air filter if it is soiled. Release the cover fastening from the machine by
lifting it with a screwdriver (Fig. 11, arrow). Place the air filter in the cover. The smooth
side of the air filter (Fig. 11, 1) must be placed towards the machine. Push the cover
back onto the machine.
WARNING! Never operate the machine without the air filter; dirt could be sucked
in and interfere with the function of the machine.
Accessories
An additional container with a top makes changing colours easy. The top prevents the
paint from drying out and the evaporation of solvents.
Container capacity: 600 ml
Order No.: 0414 906
Important Note regarding Product Liability!
Due to an EC ordinance in effect since 01.01.1990, the manufacturer is liable for his
product only if all parts originate from or were approved by the manufacturer and the
devices are assembled and operated correctly.
The use of other accessories and spare parts can partially or completely invalidate the
liability.
W 650
Spare Parts List (Fig. 13)
Pos. Order No. Designation
1 Union nut 0414 351
2 Air cap (Australia version spare part no. in brackets) 0414 368 (0414 378)
3 Nozzle 0414 352
4 Nozzle seal 0414 353
5 Air hose 0414 202
6 Carrying belt 0414 204
7 Viscosity measuring cup 0209 058
8 Cover 0414 302
9 Air filter 9995 617
10 Container with cover 0414 906
11 Suction tube 0414 363
12 Container seal 0414 364
13 Spray gun complete (Australia version spare part no. in brackets) 0414 201 (0414 218)
14 Airnozzle 0414 329
To Next Page
Loading...
