GB
14
W 660
● Do not spray any liquid of unknown hazard potential.
● The device may not be used in workplaces covered by the explosion-protection
regulations.
● To avoid the hazard of explosion when spraying, provide for effective natural or
artificial ventilation.
● There must be no sources of ignition such as, for example, open fires, smoke of lit
cigarettes, cigars and tobacco pipes, sparks, glowing wires, hot surfaces, etc. in the
vicinity during spraying.
● Ensure that no solvent vapors are sucked in by the unit. Do not spray onto the unit!
● The spray gun is not a toy; children must therefore not be allowed to handle it or
play with it.
● Before working on the spray gun remove the power plug from the socket.
● Cover areas that are not
to be sprayed. When working keep in mind that wind, for
example, may transport paint mist over great distances and cause damage.
With original WAGNER accessories and spare parts, you have the guarantee that
all safety regulations are fulfilled.
Coating Materials Suitable for Use
Water- and solvent-based paints, finishes, primers, 2-component paints, clear finishes,
automotive finishes, staining sealers and wood sealer-preservatives.
Technical Data
Max. viscosity: 45 DIN-s
Power source: 230 - 240 V ~
Power consumption: 350 W
Atomizing output: 105 W
Double insulation
:
Sound pressure level: 80 dB (A)
Oscillation level: < 2.5 m/s²
Air hose length: 1.8 m
Weight
:
3.3 kg
Description (Fig. 1)
1 Air cup 9 Air hose
2 Nozzle 10 Carrying belt
3 Union nut 11 Air filter
4 Gun body standard spray attachment 12 Air screen
5 Trigger guard 13 Mains lead
6 Material volume regulation 14 Spray gun holder
7 Handle 15 Container
8 ON/OFF switch
To Next Page
Loading...
