Need help?Do you have a question about the WAGO 750-337 and is the answer not in the manual?
General| Product Type | Fieldbus Coupler |
|---|---|
| Bus System | PROFIBUS DP |
| Number of I/O Modules Connectable | 64 |
| Power Supply | 24 V DC |
| Protection Class | IP20 |
| Data Transfer Rate | 9.6 kbps to 12 Mbps |
| Operating Temperature | -25 °C to +60 °C |
| Storage Temperature | -40 °C to +85 °C |
| Relative Humidity | 95 % (non-condensing) |
| Conformity marking | CE, UL |
Configuration settings for the CANopen slave device, including PDO mapping and other parameters.
Details on setting up Process Data Objects (PDOs) for continuous data communication between master and slave.
Assigning variables to the I/O tree after PDO mapping for data input and output.
Configuring PDO parameters, including transmission types, inhibit time, and event timers.
Configuration of network-wide settings for the CANopen master, including baud rate and SYNC period.
Protocol for continuous data communication, typically used for digital inputs and outputs.
Protocol for non-continuous data communication, suitable for infrequent setting changes.
Overview of the hardware components of the WAGO 750-337 system, including the bus coupler and modules.
Details the pin assignments and physical connections for the CANopen bus coupler.
To Next Page
