For your safety
ENG
1. For your safety
The luminaire has been designed in accord-
ance with state-of-the-art standards, manu
-
factured with utmost care using high-quality
materials, and tested.
Nevertheless, its use may constitute a risk
to persons or cause material damage.
X Read all enclosed instructions and infor-
mation.
X Please observe the warnings included
in the documentation and attached to
the unit.
X The device must only be used in tech-
nically perfect condition, and only by
persons being aw
are of the risks and
dangers involved in operating the
device.
X Keep this document available near the
device.
1.1 Designated use
This luminaire is a machine light for illu-
minating objects on and
in machines. The
luminaire is suitable for wet environments.
1.2 Safety instructions
Explosion hazar
d
Operating the luminaire in rooms subject
to e
xplosion hazards can trigger an e
xplo-
sion and result in serious injuries or death.
X Do not operate the luminaire in rooms
subject to explosion hazards.
Danger due to electric current
Improper use and f
aulty work on the lumi-
naire may result in injuries and material
damage.
X The connection must be conducted by
a trained electrician only.
X Compare the mains voltage with the
nominal voltage and the frequency
specified on the rating plate and make
sure that the
y are identical.
X Operate the luminaire at safety extra
low voltage (SEL
V) only.
X Have maintenance and repair work car-
ried out by a trained electrician only.
X Before performing work on the lumi-
naire, disconnect the luminaire from
the power supply
.
Safe mounting
A luminaire falling down can result in per-
sonal injuries and material damage.
X Use only
the delivered fastening ele-
ments or other suitable fastening ele-
ments available from the manufacturer.
X Mount fastening elements correctly.
Risk of blinding caused by bright light
source
Looking directly into the light source ma
y
cause temporary visual impairment and
afterimages. This may result in irritations,
inconveniences, impairments or even acci-
dents.
X Do not look into the light source.
X Locate the luminaire in such a way that
looking directly into the light source is
avoided.
4
To Next Page
Loading...