Multi Mode
27 Blofeld User´s Manual
High Vel 1…127
High Vel is the counterpart to the LowKey parameter.
Only notes with a key number lower or equal to the
selected value are passed through. Set this parameter to
G8 if you want to use the full keyboard range.
Low Key C-2…G8
Analogous to the velocity switching parameters, the key
range can be restricted for the part’s tone generation.
Only notes with a key number higher or equal to the
selected value are passed through. Set this parameter to C-
2 if you want to use the full keyboard range.
High Key C-2…G8
High Key is the counterpart to the Low Key parameter.
Only notes with a key number lower or equal to the
selected value are passed through. Set this parameter to
G8 if you want to use the full keyboard range.
MIDI receive / ignore
Determines if incoming MIDI data is received or ignored.
USB receive / ignore
Determines if incoming USB messages are received or
ignored.
Local receive / ignore
Determines if incoming MIDI data from the keyboard is
received or ignored.
w Note that the keyboard will play all enabled parts,
regardless of selected channel.
Pitch Bend receive / ignore
Determines if incoming pitch bend is received or ignored.
Mod Wheel receive / ignore
Determines if incoming modulation wheel data is
received or ignored.
Pressure receive / ignore
Determines if incoming pressure data (Aftertouch) is
received or ignored.
To Next Page
