Walker C19i Illustrated Parts Manual

6
Beginning S/N 168631
Use only genuine Walker
®
replacement parts.
ITEM PART DESCRIPTION NO.
NO. NO. REQ’D
ITEM PART DESCRIPTION NO.
NO. NO. REQ’D
REAR BODY ASSEMBLY
Rear Body Assembly
1 5976-2 Grommet (3/16 x 3/4) 1
2 5105-1 Rear Body Cover 1
3 8515-14 Catcher Handle Plate, RH 1
4 8389-5 Splash Guard 1
5 7146 13mm Ball Stud 2
6 7147 Spring Clip 2
7 7145 Gas Spring Assembly 1
(Includes Items # 5 & 6)
8 7190-1 Insulation Foam Pad, LH 1
9 7190-2 Insulation Foam Pad, RH 1
10 5105-6 Rear Body, Catcher Support Frame 1
11 8515-13 Catcher Handle Plate, LH 1
Fasteners
F002 10-24 Keps Nut 4
F009 5/16-18 Whiz Locknut 2
F023 10-24 ESNA Nut 4
F026 10-24 x 1/2 PPHMS 4
F031 1/4-20 x 5/8 Hex Bolt 2
F032 1/4-20 x 3/4 Hex Bolt 1
F390 1/4-20 x 7/8 Carriage Bolt 2
F569 1/4-20 Flange Top Lock Nut 5
F615 1.0 x .255 x .125 Washer 1
F617 10-24 x 3/8 Truss Head Torx 4
NOTE: Rear Bumper Assembly is not shown here. Refer to BODY /
CHASSIS ASSEMBLY, Page 4.

Walker C19i Specifications

General

Brand	Walker
Model	C19i
Category	Lawn Mower
Language	English