English - 21 -
After factory settings are loaded, “First Time
Installation” menu will be displayed.
The menu which is displayed for language selection
appears on the screen at fi rst. By using “
” or “ ”
buttons, select the desired language option, and press
OK button to activate.
After then, “First time installation” OSD will appear on
the screen. By pressing “
” or “ ” buttons, select the
Country you want to set and press OK button (* only
for EU countries).
Next, active antenna mode selection OSD will appear
on the screen. Use “
” or “ ” to set and press OK to
continue. See the section, “Initial Settings” for more
information.
After active antenna mode option is selected, a
message asking for automatic search appears on
the screen:
Highlight “Yes” item by pressing “ ” or “ ” buttons
and press OK button to start installation. After search
is completed for digital channels, a message asking
whether to search for analogue channels appears
on the screen. This process is same as described in
Automatic Search section.
Media Browser (in DTV mode)
Whenever you plug a USB fl ash disk to your TV, the
following message will be displayed on the screen:
Select YES or NO by pressing “ ” or “ ” button and
“OK” button to continiue.
You can also select Media Browser item from the main
menu by using “
” or “ ” buttons. Press OK to view
Media Browser contents.
You can play audio and photo and video (optional)
fi les from a USB fl ash disk.
Note: Some USB compliant devices may not be supported.
Note: Movie Sense and Pixellence features cannot be set
while in Media Browser mode.
Note: If you plug USB stick in analogue mode, the TV will
automatically switch to digital TV mode.
Note: If the USB stick is not recognized after Power off/on or
First Time Installation, fi rst plug the USB device out and power
off/on the TV set. Plug the USB device again.
Press OK to browse, “M” to quit.
Playing Audio Files:
Play This (OK) : Plays the selected fi le.
Play (GREEN) : Play all media fi les in the folder
starting with the selected one.
Pause/Resume (YELLOW button): Pauses or
resumes playback.
Stop (RED) : Stop the playing fi le.
Previous/Next (
/ ) : Jumps to previous or next
fi le to play.
Shuffl e (INFO) : Plays the fi les randomly. If shuffl e
mode is enabled, previous/next functions will also
jump to the tracks randomly.
Loop (BLUE) : Plays the selected fi le repeatedly.
Viewing JPEG Files
Jump (0...9) : jump to selected fi le using the numeric
buttons.
OK : view the selected picture in full screen.
[GB]_MB36_MASQUE_HDIDTV-MPEG4_BRONZE8_32843W_1205UK_10069999_50176032.indd 21[GB]_MB36_MASQUE_HDIDTV-MPEG4_BRONZE8_32843W_1205UK_10069999_50176032.indd 21 06.09.2010 09:12:1506.09.2010 09:12:15
To Next Page
Loading...
