24
Fig. 11 FRAME HANDLES
The generator is designed to be easily moved
from one location to another. Review the follow-
ing details on how the unit can be moved:
1. Frame Handles:
The frame is designed with 2 frame handles
that provide a location to attach to the frame
for moving with an A frame, forklift, crane or
other lifting system.
2. Wheel Kit:
A wheel kit is available to move the genera-
tor. Place the frame into the wheel kit and
move to the new location.
3. Transporting:
When transporting from location to location,
follow this procedure:
a. Run the engine (use the generator)
until the fuel tank is empty or nearly
empty.
b. Turn the fuel line off.
5.7 MOVING
Fig. 12 WHEEL UNIT
Fig. 13 FUEL VALVE (Typical)
To Next Page
Loading...