Walmart Mainstays Oversized Zero Gravity Swing User Manual

Questions, problems, missing parts? Before returning to your retailer, call our customer service department
at (866) 905 - 4107, 8:30 a.m. - 5:00 p.m. PST/11:30 a.m. - 8:00 p.m., EST, Monday - Friday.
Step 2:
5
- Insert the Long Leg Connector 1 (E) to the Long Leg
Connector 2 (F), secure with M8x35 Bolt &
Washer (DD), M8 Washer (FF) and M8 Nut (GG).
- Completely tighten.
Step 1:
- Insert the Top Bar 2 (B) to the Top Bar 1 (A).
Attach the Connect Plate (P) to Top Bar (A&B) with
Nut (GG).
- Completely tighten.
Step 3:
Step 1
Step 2
Step 3
- Insert the Rear Leg (D) to the Top Bar (A&B).
- Attach Front Leg (C) to the Rear Leg (D) and Top
Bar (A&B) with M8x65 Bolt & Washer (BB), M8
Washer (FF) and M8 Nut (GG).
- Repeat the same procedure for both sides.
Don’t completely tighten.
-
-
M8x45 Bolt & Washer (CC), M8 Washer (FF), M8
Walmart Assembly Instruction
NOTE:
Do not completely tighten bolts
The M8 Bolt cover (HH), in step 1 to 12 are only for reference.
Please attach them to bolts in step 13.
until all steps are completed.
Install on level ground , Install not less than 6ft distance from any obstruction
(e.g.fence,garage,house,overhanging branches,laundry lines,electrical wires).
This swing unit is heavy, and may require two adults for safe assembly.
Mainstays Oversized Zero Gravity Swing
Vendor stock No. : MSS128059664001 / MSD128059664006 / MSD128059664044

Walmart Mainstays Oversized Zero Gravity Swing Specifications

General

Brand	Walmart
Model	Mainstays Oversized Zero Gravity Swing
Category	Outdoor Furnishing
Language	English