Questions, problems, missing parts? Before returning to your retailer, call our customer service department
at (866) 905 - 4107, 8:30 a.m. - 5:00 p.m. PST/11:30 a.m. - 8:00 p.m., EST, Monday - Friday.
Step 4
Step 5
Step 4:
6
Step 6
Step 5:
Step 6:
- Attach the Long Leg Connector (E&F) to the Rear
Leg (D) with M8x45 Bolt & Washer (CC), M8
Washer (FF), and M8 Nut (GG).
- Repeat the same procedure for both sides.
- Don’t completely tighten.
- Attach the Short Leg Connector (G) to the Front
Leg (C) & Rear Leg (D) with M8x65 Bolt & Washer (BB)
M8 Washer (FF) and M8 Nut (GG).
- Repeat the same procedure for both sides.
- Completely tighten all bolts from step 1 to 3 with Open
Hex Wrench (KK) and Ratchet Wrench (LL) or Allen
Wrench (NN).
- Attach the Support (J) to the Cup Holder (N) with
Screw (EE). Completely tighten with Phillips
Screwdriver (MM).
Walmart Assembly Instruction
NOTE:
Do not completely tighten bolts
The M8 Bolt cover (HH), in step 1 to 12 are only for reference.
Please attach them to bolts in step 13.
until all steps are completed.
Install on level ground , Install not less than 6ft distance from any obstruction
(e.g.fence,garage,house,overhanging branches,laundry lines,electrical wires).
This swing unit is heavy, and may require two adults for safe assembly.
Mainstays Oversized Zero Gravity Swing
Vendor stock No. : MSS128059664001 / MSD128059664006 / MSD128059664044
To Next Page
Loading...