Need help?Do you have a question about the Walrus Pump Co., Ltd. HQ Series and is the answer not in the manual?
General| Series | HQ Series |
|---|---|
| Type | Centrifugal Pump |
| Inlet/Outlet | 1 inch |
| Pump Body Material | Cast Iron |
| Category | Water Pump |
| Manufacturer | Walrus Pump Co., Ltd. |
| Application | Water transfer |
| Voltage | 110V/220V |
| Power | Varies by model (typically 0.5 HP to 10 HP) |
Guides the user through the priming procedure, ensuring the pump is filled with water before operation.
Outlines routine checks, long-term storage, freeing stuck pumps, and pressure tank air charge maintenance.
Provides solutions for common pump problems such as not starting, cutting out, or low discharge flow.
Addresses issues like no power, low/high voltage, no water consumption, or seized-up pump.
Covers scenarios like seized-up or overloaded motors, poor water supply, or activated protection.
Addresses potential electric shock due to defective ground connection.
Diagnoses issues related to poor water supply, air suck-in, or a defective check valve.
To Next Page
