Need help?Do you have a question about the Walrus Pump Co., Ltd. HQ200 and is the answer not in the manual?
Details ambient temp, liquid temp, system pressure, humidity, and use limitations.
Ensures the pump foundation is rigid and the pump is securely bolted.
Advises on adequate drainage systems and weather-proof housing for outdoor installations.
Emphasizes shutting off the pump without liquid source and electrical safety precautions.
Provides reminders for flange installation, including alignment and screw torque.
Details on installing short, straight, airtight suction lines with correct diameter.
Ensures correct voltage, grounding, and use of safety devices like RCD.
Step-by-step guide for priming the pump before initial start-up.
Advises on shutting down for problems, avoiding continuous cycling, and handling issues.
General| Model | HQ200 |
|---|---|
| Category | Water Pump |
| Manufacturer | Walrus Pump Co., Ltd. |
| Voltage | 220 V |
| Frequency | 50 Hz |
| Inlet/Outlet Size | 1 inch |
| Material | Cast Iron |
To Next Page
