Walrus TQ200 Replacing

Replacing TQ200 Mechanical Seal
1.Removing mech seal. WI-D3-S-B001E-1
Using Allen wrench (metric size) to remove the 6
screws.
Using wrench to remove the stud bolt.
Remove the 2
nd
stage impeller. Remove the intermediate chamber.
Remove the 1
st
stage impeller. Remove the cap and spring.
1 2
3
6 5
4

Walrus TQ200 Specifications

General

Brand	Walrus
Model	TQ200
Category	Water Pump
Language	English